How Do You Make a Bank Fishing Pole Holder?

Making your own bank fishing pole holder is a great way to save money and get the exact holder you want for your fishing poles. Bank fishing pole holders are designed to securely hold your fishing poles in place while you’re on the bank. The following steps will help you make a bank fishing pole holder quickly and easily:

Step 1: Gather Your Materials. You’ll need PVC pipe, PVC pipe connectors, screws and washers, and a drill. Make sure all of these materials are the same size – 3/4 inch pipe and fittings should work well for most applications.

Step 2:Design Your Pole Holder. Decide how many poles you want to hold, then design your holder accordingly.

This will determine how many pipes and connectors you need – be sure to include a few extra pieces just in case. It’s also important to make sure that each section of the holder is at least 12 inches apart; this will ensure that each pole is secure and won’t get tangled with the others.

Step 3: Cut The PVC Pipes . Using a hacksaw or PVC pipe cutter, cut each piece of pipe according to the measurements from Step 2. Be sure to wear eye protection when doing this step!

Step 4: Assemble The Holder . Once all of the pieces are cut, it’s time to put them together.

Use PVC glue or epoxy to attach the sections together; make sure that each connection is secure before moving on to the next one. If necessary, use screws and washers to further reinforce the connections.

Step 5: Drill Holes For The Poles . Once your holder is assembled, it’s time to drill holes for the poles.

Make sure that each hole is large enough for your pole diameter but not so large that it wobbles around too much when placed in it; this could cause damage over time! Additionally, be sure that each hole is far enough away from its neighboring holes so that adjacent poles won’t tangle with one another when placed in their respective holes.

Conclusion: Making a bank fishing pole holder can be easy if you follow these steps! Gather your materials, design your holder according to how many poles you plan on using, cut the PVC pipes according to measurements, assemble them with glue or epoxy reinforced with screws if necessary, then drill holes for your poles accordingly. With a little bit of effort, patience and some DIY spirit you’ll have yourself an awesome bank fishing pole holder!

Photo of author

Lindsay Collins