It can be quite a problem when the top eyelet on a fishing pole breaks. This is because the eyelet is essential for attaching the line, meaning that without it, fishing simply won’t be possible.
Fortunately, fixing the top eyelet on a fishing pole is not as difficult as it may seem. All that’s needed is some basic tools and supplies.
Step 1: Gather Tools and Supplies – The first step in fixing the top eyelet of a fishing pole is to gather all of the necessary tools and supplies. Some of these include an adjustable wrench, thin wire cutters, epoxy glue, fine sandpaper, pliers and a drill bit.
Step 2: Remove Existing Eyelet – The next step is to remove the existing broken eyelet by using an adjustable wrench. Carefully twist off the eyelet to free it from its base.
Step 3: Cut Wire – Once the broken eyelet has been removed, use wire cutters to cut a length of thin wire that will fit into the hole where the original eyelet was located. Make sure that there are no sharp edges on either end of the wire.
Step 4: Sand Wire – Use fine sandpaper to sand down any rough patches or sharp edges on both ends of the wire. This will help ensure that it fits snugly into place when inserted into the hole where the original eyelet was located.
Step 5: Insert Wire – Now take your pliers and carefully insert one end of the sanded wire into the hole where you removed your original eyelet from. Make sure that it fits snugly and securely.
Step 6: Apply Glue – Apply some epoxy glue around both ends of your inserted wire in order to make sure that it stays firmly in place once dry.
Conclusion:
Fixing a fishing pole’s top eyelet requires only basic tools and supplies such as an adjustable wrench, thin wire cutters, epoxy glue, fine sandpaper, pliers and a drill bit. By following these steps carefully one can easily replace an old or broken top eyelet with ease!
